CMOS Battery Replacement of Dell Latitude E5550 in Faridabad

 

Dell Latitude E5550 CMOS Battery Removal and Installation

Step : 1

  • Remove the screws (6 x5 x 5mm).
  • Pry up & unsnap the access door.
  • Remove the Access Door.

LatE5550accessdoorPRYstep1

Step : 2

  • Remove screw (1 xM2 x 3mm).
  • Unplug cable.
  • Remove Battery

LatE5550batteryScrewStep2

Step : 3

  • Separate the clips and remove the RAM Memory.

LatE5550memorystep3

Step : 4

  • Disconnect hard drive cable.
  • Remove screws (4 xM2 x 3mm).
  • Remove Hard Drive.

LatE5550harddriveScrewStep4

Step : 5

  • Pry loose and remove Keyboard Bezel.
  • Remove keyboard cables.
  • Remove screws (2 x M2x2mm).
  • Remove Keyboard.

keyboardbezelPRYstep5

Step : 6

  • Remove bottom screws (7 x5 x 5mm) (9 x M2 x 3mm)

LatE5550baseScrewStep6

Step : 7

  • Remove palmrest cables.
  • Remove palmrest screws (3 x5 x 5mm).
  • Remove Palmrest.

LatE5550Palmrestcablesstep7

Step : 8

  • Remove right screw (1 xM2 x 3mm).
  • Remove left screw (1 xM2 x 3mm).

LatE5550rearhingerightStep8

Step : 9

  • Remove screws (4 xM2 x 3mm).
  • Remove Hinge Covers from computer.

LatE5550hingeCOVERStep9

Step : 10

  • Remove WLAN cables.
  • Remove screw from display cable bracket (1 xM2 x 3mm)
  • Remove bracket and Display Cable.

LatE5550WLANremovestep10

Step : 11

  • Remove screws (4 x5 x 5mm).
  • Remove Display Assembly.

LatE5550displayassembrestep11

Step : 12

  • Unplug cable.
  • Remove Cooling Fan.

LatE5550fanCABLEstep12

Step : 13

  • Remove Speaker 
  • Remove DC Jack 

LatE5550cablesep13

Step : 14

  • Unplug cable from circuit board.
  • Remove screws (2 xM2 x 3mm).
  • Remove Audio Circuit Board.

LatE5550audioCIRCUITstep14

Step : 15

  • Remove screws (3 x5 x 5mm).
  • Remove Motherboard.

LatE5550MBRemstep15

Step : 16

Unplug cable and remove CMOS Battery.

LatE5550cmosstep16

Read More Details:

http://goo.gl/sFGTCn

Share This:

Speaker Replacement of Dell Latitude E5550 in Noida Sector -18

 

Dell Latitude E5550 Speaker Removal and Installation

Step : 1

  • Remove the screws (6 x5 x 5mm).
  • Pry up & unsnap the access door.
  • Remove the Access Door.

LatE5550accessdoorPRYstep1

Step : 2

  • Remove screw (1 xM2 x 3mm).
  • Unplug cable.
  • Remove Battery

LatE5550batteryScrewSizestep2

Step : 3

  • Separate the clips and remove the RAM Memory.

LatE5550memoryCLIPS1step3

Step : 4

  • Disconnect hard drive cable.
  • Remove screws (4 xM2 x 3mm).
  • Remove Hard Drive.

LatE5550harddriveremstep4

Step : 5

  • Pry loose and remove Keyboard Bezel.
  • Remove keyboard cables.
  • Remove screws (2 x M2x2mm).
  • Remove Keyboard.

keyboardbezelPRYstep5

Step : 6

  • Remove bottom screws (7 x5 x 5mm) (9 x M2 x 3mm)

LatE5550base1ScrewSizestep6

Step : 7

  • Remove palmrest cables.
  • Remove palmrest screws (3 x5 x 5mm).
  • Remove Palmrest.

LatE5550Palmrestcablesste7

Step : 8

  • Remove right screw (1 xM2 x 3mm).
  • Remove left screw (1 xM2 x 3mm).

LatE5550rearhingerightScrewStep8

Step : 9

  • Remove screws (4 xM2 x 3mm).
  • Remove Hinge Covers from computer.

LatE5550hingeCOVERScrewStep9

Step : 10

  • Remove WLAN cables.
  • Remove screw from display cable bracket (1 xM2 x 3mm)
  • Remove bracket and Display Cable.

LatE5550WLANremoveANTENNAstep10

Step : 11

  • Remove screws (4 x5 x 5mm).
  • Remove Display Assembly.

LatE5550displayassembrestep11

Step : 12

  • Unplug cable.
  • Remove Cooling Fan.

LatE5550fanCABLEstep12

Step : 13

  • Remove Speaker
  • Remove DC Jack

LatE5550cablestep13

Step : 14

  • Unplug cable from circuit board.

LatE5550audioCIRCUITcablestep14

Step : 15

  • Remove screws (3 x5 x 5mm).
  • Remove Motherboard.

LatE5550MBRemstep15

Step : 16

  • Remove speaker screws (4 x5 x 7mm (3mm thread).
  • Remove Speaker.

LatE5550speakersScrewStep16

Read More Details:

http://goo.gl/lJBhOx

Share This:

LCD Replacement of Dell Inspiron 1545 in Noida Sector – 16

 

Dell Inspiron 154LCD Cable Installation and Removal Instructions

Step : 1

  • Remove the battery.

1545-batterystep1

Step : 2

  • Access Door
  • Unscrew the 4 screws holding the Bottom Base Access Cover and remove the cover, starting from right to left.

1545-accessdoorstep2

Step : 3

  • Carefully dislodge the cables until they are completely loose from the base.
  • Remove the (2) 2.5mm x 5mm hinge screws from the base of the laptop.

1545-basestep3.

Step : 4

  • Power Button Cover
  • Remove two 2mm x 3mm screws that hold the 1545 center control power button cover to the base of the computer.

1545-powerbutton step4

Step : 5

  • Turn the computer over (as if you were typing on it), and fully open the display (approximately 180 degrees, or as far as possible).
  • Lift and unsnap the 1545 center control power button cover using a small flat head screw driver or a plastic scribe from the backside of the computer, from right to left. **Be very careful removing it because the plastic can be fragile.

1545-displaystep5

Step : 6

  • Keyboard
  • Unscrew the (2) 2.5mm x 5mm screws above the keyboard and gently lift up the keyboard to reveal the ribbon cable. Be careful lifting the keyboard because it is very easy to cause damage to the ribbon cable or the motherboard connector. (If the motherboard connector breaks, it is very hard to find replacements for them without replacing the entire motherboard.)

1545-keyboardstep6.

Step : 7

  • Lift the keyboard cable connector latch and remove the keyboard ribbon cable and keyboard.

1545-keyboardcablestep7

Step : 8

  • Display Assembly
  • Loosen the LCD display cable from motherboard the by pulling up on the tab.
  • Loosen the camera cable from the motherboard.

1545-LCDdisplaystep8

Step : 9

  • Pull the WWAN and WLAN cables through the motherboard paying close attention to the routing, once again.

1545-WLANcablestep9

Step : 10

  • Unscrew (2) 2.5mm x 3mm wafer screws on the left hinge.
  • Unscrew (2) 2.5mm x 3mm wafer screws on the right hinge.

1545-lefthingestep10

Step : 11

  • Lift the display from the base.

1545-displaybasestep11

Step : 12

  • Remove the 6 rubber screw hole covers around the LCD display bezel.

1545-LCDdisplaybezelstep12

Step : 13

  • Unscrew the (5) 2.5mm x 5mm LCD bezel screws.
  • Loosen the 1 screw has a retaining clip and will stay attached to the bezel.

1545-LCDbezelstep13.

Step : 14

  • Carefully lift up the edge of the bezel until it unsnaps and slowly work your way around the screen. (be very careful because there are sharp metal edges on the screen that can easily cut you)

1545-edgestep14

Step : 15

  • Lift off the bezel. (In some case the bezel might be glued down to the LCD screen and may require extra force to pull off.)

1545-LCDscreenstep15

Step : 16

  • Unscrew (1) 2.5mm x 5mm screws holding the right LCD rail to the base.
  • Unscrew (1) 2.5mm x 5mm screws holding the left LCD rail to the base.

1545-basestep16

Step : 17

  • Unscrew (2) 2.5mm x 4mm screws holding the LCD inverter to the base.
  • Lift the screen off of the LCD back assembly.

1545-lcdbackstep17.

Step : 18

  • Remove the LCD Cable by flipping the screen over, on a clean surface so it doesn’t get scratched, and remove the securing tape and disconnect the cable from the connector.

1545-cablestep18jpg

Step : 19

  • Unplug the LCD cable from the inverter.

1545-lcdcablestep19

Read More Details:

http://goo.gl/iJh756

Share This:

Motherboard Replacement of Dell Latitude E5550 in Noida Sector – 15

 

Dell Latitude E5550 Motherboard Installation and Removal Instructions

Step : 1

  • Remove the screws (6 x5 x 5mm).
  • Pry up & unsnap the access door.
  • Remove the Access Door.

LatE5550accessdoorStep1

Step : 2

  • Remove screw (1 xM2 x 3mm).
  • Unplug cable.
  • Remove Battery

LatE5550batteryStep2

Step : 3

  • Separate the clips and remove the RAM Memory.

LatE5550memorystep3

Step : 4

  • Disconnect hard drive cable.
  • Remove screws (4 xM2 x 3mm).
  • Remove Hard Drive.

 

Step : 5

  • Pry loose and remove Keyboard Bezel.
  • Remove keyboard cables.
  • Remove screws (2 x M2x2mm).
  • Remove Keyboard.

keyboardbezestep5

Step : 6

  • Remove bottom screws (7 x5 x 5mm) (9 x M2 x 3mm)

LatE5550base1Step6

Step : 7

  • Remove palmrest cables.
  • Remove palmrest screws (3 x5 x 5mm).
  • Remove Palmrest.

LatE5550Palmreststep7

Step : 8

  • Remove right screw (1 xM2 x 3mm).
  • Remove left screw (1 xM2 x 3mm).

LatE5550rearhingerightStep8

Step : 9

  • Remove screws (4 xM2 x 3mm).
  • Remove Hinge Covers from computer

LatE5550hingeCOVERStep9

Step : 10

  • Remove WLAN cables.
  • Remove screw from display cable bracket (1 xM2 x 3mm)
  • Remove bracket and Display Cable.

LatE5550lcdMBstep10

Step : 11

  • Remove screws (4 x5 x 5mm).
  • Remove Display Assembly.

LatE5550displayassembrestep11

Step : 12

  • Unplug cable.
  • Remove Cooling Fan.

LatE5550fanstep12

Step : 13

  • Remove Speaker 
  • Remove DC Jack

LatE5550cablestpe13

Step : 14

  • Unplug cable from circuit board.
  • Remove screws (2 xM2 x 3mm).
  • Remove Audio Circuit Board.

LatE5550audioCIRCUITstep14

Step : 15

  • Remove screws (3 x5 x 5mm).
  • Remove Motherboard.

LatE5550MBRemstep15

Read More Details:

http://goo.gl/L5TU2z

Share This:

CMOS Battery Replacement of Dell Inspiron 5545 in Noida

 

CMOS Battery Replacement Dell Inspiron 5545 Working Process

Step : 1

  • Remove the 2 -5 x 5mm screws.
  • Pry up the Access Door.

Insp15-5545AccessDoorStep1

Step : 2

  • Remove the 4 -5 x 5mm screws.
  • Use the tab & remove the Battery.

Insp15-5545BatteryStep2

Step : 3

  • Remove the 4 -5 x 5mm screws.
  • Using the tab, lift the Hard Drive out of the laptop.
  • Unplug the hard drive connector cable.

Insp15-5545HardDrivestep3

Step : 4

  • Unplug & loosen the USB / SD circuit board cable.
  • Unplug and loosen the LCD cable.

Insp15-5545UsbSdstep4

Step : 5

  • Remove the 2 -5 x 5mm fan screws.
  • Unplug the fan cable.
  • Remove the Cooling Fan.

Insp15-5545Fanstep5

Step : 6

  • Press the latches in to loosen the keyboard.
  • Carefully turn the keyboard over.

Insp15-5545Keyboardstep6

Step : 7

  • Unplug the keyboard cable & backlight cable.
  • Remove the Keyboard.

Insp15-5545Keyboardstep7

Step : 8

  • Unplug the palmrest cables.
  • Remove the 9 -5 x 5mm palmrest screws.
  • Remove the 1 -5 x 5mm screw under the palmrest cable

Insp15-5545PalmrestStep8

Step : 9

  • Close the laptop & turn it over.
  • Remove the 10 -5 x 8mm bottom screws.
  • Remove theBottom Base by carefully prying it up around the edge of the laptop.

Insp15-5545BaseBottomstep9

Step : 10

  • Remove the tape.
  • Unplug the cable.
  • Remove the CMOS Battery.

Insp15-5545CmosCablestep10

Contact Us: +91-9599650127

Visit here:

Dell Service Center in Noida

 

Share This:

Battery Replacement of Dell Inspiron 5545 in Gurgaon Sector – 9

 

Battery Replacement Dell Inspiron 5545 Installation and Removal Instructions

Step : 1

  • Remove the 2 -5 x 5mm screws.
  • Pry up the Access Door.

Insp15-5545AccessDoorStep1

Step : 2

  • Remove the 4 -5 x 5mm screws.
  • Use the tab & remove the Battery.

Insp15-5545BatteryStep2

Read more Details:

https://goo.gl/hfmwvY

Share This:

Touchpad Replacement of Dell Inspiron 5545 in Gurgaon Sector – 7

 

Dell Inspiron 5545 Touchpad Replacement Working Process

Step : 1

  • Remove the 2 –5 x 5mm screws.
  • Pry up theAccess Door.

Insp15-5547step1

Step : 2

  • Remove the 4 –5 x 5mm screws.
  • Use the tab & remove theBattery.

Insp15-5547BatteryStep2Step : 3

  • Unplug the antenna cables.
  • Remove the 1 –M2 x 3mm
  • Remove theWireless WLAN Card.

Insp15-5547WirelessStep3

 

Step : 4

  • Remove the 4 –5 x 5mm screws.
  • Using the tab, lift theHard Drive out of the laptop.
  • Unplug the hard drive connector cable.

Insp15-5547HardDrivestep4

 

Step : 5

  • Unplug & loosen the USB / SD circuit board cable.
  • Unplug and loosen the LCD cable.

 

Insp15-5547UsbSdCircuitstep5

Step : 6

  • Remove the 2 –5 x 5mm fan screws.
  • Unplug the fan cable.
  • Remove theCooling Fan.

 

 

Insp15-5547FanStep6

Step : 7

  • Press the latches in to loosen the keyboard.
  • Carefully turn the keyboard

 

Insp15-5547Keyboardstep7

Step : 8

  • Unplug the keyboard cable & backlight
  • Remove theKeyboard.

Insp15-5547KeyboardStep8

Step : 9

  • Unplug the palmrest cables.
  • Remove the 9 –5 x 5mm palmrest screws.
  • Remove the 1 –5 x 5mm screw under the palmrest cable.

Insp15-5547PalmrestStep9

Step : 10

  • Close the laptop & turn it over.
  • Remove the 10 –5 x 8mm bottom screws.
  • Remove theBottom Base by carefully prying it up around the edge of the laptop.

 

Insp15-5547BaseBottomStep10

Step : 11

  • Remove the 2 –5 x 5mm left hinge screws.
  • Remove the 1 –5 x 5mm right hinge screws.
  • Carefully open the laptop & remove theLCD Display Assembly.

Insp15-5547HingeStep11

Step : 12

  • Remove the 4 –M2 x 3mm
  • Remove & clean theHeatsink.
  • **This laptop used in this example has Integrated Graphics. The model with Discrete Graphics will have an additional 2 heatsink screws.**

Insp15-5547HeatsinkStep12

Step : 13

  • Remove the 1 –M2 x 3mm
  • Remove theUSB Circuit Board.

Insp15-5547UsbSdCircuitStep13

Step : 14

  • Unplug the cable.
  • Remove theSpeakers.

Insp15-5547SpeakerStep14

Step : 15

  • Unplug the cable.
  • Remove theDC Jack.

Insp15-5547DcJackStep15

Step : 16

  • Remove the 2 –M2 x 3mm motherboard screws.
  • Remove theMotherboard.

Insp15-5547MotherboardStep16

Step : 17

  • The remaining piece is thePalmrest Touchpad.

Insp15-5547PalmrestStep17

Visit here:

http://www.ncrsystemsolution.com/dell-laptop-repair-service-center-gurgaon

Share This:

Screen Replacement of Dell Inspiron 1545 in Gurgaon Sector – 14

 

Screen Replacement Dell Inspiron 1545 Installation and Removal Instructions

Step : 1

  • Remove the battery.

1525-battery

Step : 2

  • Access Door
  • Unscrew the 4 screws holding the Bottom Base Access Cover and remove the cover, starting from right to left.

screen2

Step : 3

  • Carefully dislodge the cables until they are completely loose from the base.
  • Remove the (2) 2.5mm x 5mm hinge screws from the base of the laptop.

screen3

Step : 4

  • Power Button Cover
  • Remove two 2mm x 3mm screws that hold the 1545 center control power button cover to the base of the computer.

screen4

Step : 5

  • Turn the computer over (as if you were typing on it), and fully open the display (approximately 180 degrees, or as far as possible).
  • Lift and unsnap the 1545 center control power button cover using a small flat head screw driver or a plastic scribe from the backside of the computer, from right to left. **Be very careful removing it because the plastic can be fragile.

screen5

Step : 6

  • Keyboard
  • Unscrew the (2) 2.5mm x 5mm screws above the keyboard and gently lift up the keyboard to reveal the ribbon cable. Be careful lifting the keyboard because it is very easy to cause damage to the ribbon cable or the motherboard connector. (If the motherboard connector breaks, it is very hard to find replacements for them without replacing the entire motherboard.)

screen6

Step : 7

  • Lift the keyboard cable connector latch and remove the keyboard ribbon cable and keyboard.

screen7

Step : 8

  • Display Assembly
  • Loosen the LCD display cable from motherboard the by pulling up on the tab.
  • Loosen the camera cable from the motherboard.

screen8

Step : 9

  • Pull the WWAN and WLAN cables through the motherboard paying close attention to the routing, once again.

screen9

Step : 10

  • Unscrew (2) 2.5mm x 3mm wafer screws on the left hinge.
  • Unscrew (2) 2.5mm x 3mm wafer screws on the right hinge.

screen10

Step : 11

  • Lift the display from the base.

screen11

Step : 12

  • Remove the 6 rubber screw hole covers around the LCD display bezel.

screen12

Step : 13

  • Unscrew the (5) 2.5mm x 5mm LCD bezel screws.
  • Loosen the 1 screw has a retaining clip and will stay attached to the bezel

screen13

Step : 14

  • Carefully lift up the edge of the bezel until it unsnaps and slowly work your way around the screen. (be very careful because there are sharp metal edges on the screen that can easily cut you)

screen14

Step : 15

  • Lift off the bezel. (In some case the bezel might be glued down to the LCD screen and may require extra force to pull off.)

screen15

Step : 16

  • Unscrew (1) 2.5mm x 5mm screws holding the right LCD rail to the base.
  • Unscrew (1) 2.5mm x 5mm screws holding the left LCD rail to the base.

screen16

Step : 17

  • Unscrew (2) 2.5mm x 4mm screws holding the LCD inverter to the base.
  • Lift the screen off of the LCD back assembly.

screen17

Step : 18

  • Remove the LCD Cable by flipping the screen over, on a clean surface so it doesn’t get scratched, and remove the securing tape and disconnect the cable from the connector.

screen18

Contact Us: +91-9599650127

Visit here:

http://goo.gl/CuHf5s

Share This:

Speaker Repair of Dell Inspiron 5545 in Gurgaon Sector – 29

 

Speaker Dell Inspiron 5545 Installation and Removal Instructions.

Step : 1

  • Remove the 2 – 5 x 5mm screws.
  • Pry up the Access Door.

Insp15-5547Accessstep1

Step : 2

  • Remove the 4 – 5 x 5mm screws.
  • Use the tab & remove the Battery.

Insp15-5547Batterystep2

Step : 3

  • Remove the 4 – 5 x 5mm screws.
  • Using the tab, lift the Hard Drive out of the laptop.
  • Unplug the hard drive connector cable.

Insp15-5547HardDrivestep3

Step : 4

  • Unplug & loosen the USB / SD circuit board cable.
  • Unplug and loosen the LCD cable.

Insp15-5547LcdCablestep4

Step : 5

  • Remove the 2 – 5 x 5mm fan screws.
  • Unplug the fan cable.
  • Remove the Cooling Fan.

Insp15-5547Fanstep5

Step : 6

  • Press the latches in to loosen the keyboard.
  • Carefully turn the keyboard over.

Insp15-5547Keyboardstep6

Step : 7

  • Unplug the keyboard cable & backlight cable.
  • Remove the Keyboard.

Insp15-5547Keyboardstep7

Step : 8

  • Unplug the palmrest cables.
  • Remove the 9 – 5 x 5mm palmrest screws.
  • Remove the 1 – 5 x 5mm screw under the palmrest cable.

Insp15-5547Palmreststep8

Step : 9

  • Close the laptop & turn it over.
  • Remove the 10 – 5 x 8mm bottom screws.
  • Remove the Bottom Base by carefully prying it up around the edge of the laptop.

Insp15-5547Basestep9

Step : 10

  • Unplug the cable.
  • Remove the Speakers.

 

Insp15-5547Speakersstep10

#NCR SYSTEM SOLUTION : +91-9599650127

Visit here:

http://goo.gl/2w5QOc

Share This:

Keyboard Repair and Replacement of Dell Inspiron 5547 in Gurgaon

 

Dell Inspiron 5547 Keyboard Repair Working Process.

Step : 1

  • Remove the 2 – 5 x 5mm screws.
  • Pry up the Access Door.

 

Step : 2

  • Remove the 4 – 5 x 5mm screws.
  • Use the tab & remove the Battery.

 

Step : 3

  • Press the latches in to loosen the keyboard.
  • Carefully turn the keyboard over.

 

Step :  4

  • Unplug the keyboard cable & backlight cable.
  • Remove the Keyboard.

keyboardrepairprocess

Contact Us : +91-9599650127

Get More Details:

http://goo.gl/mXt8YN

Share This: